Skip to main content

802

2K Diamond Cut Clearcoat

Two-component aerosol clearcoat for diamond-cut refinishing. Request the current technical and safety data sheets for application and handling.

M&H Group / Thailand & APAC

Wheel Restore

Speak with M&H Sales

Send Sales a message →

Kevin Duffy

English-speaking sales

+66 88 984 8897

K. Kananek Khumto

Thai-speaking sales

+66 85 636 2519

Diamond cutting

Product details.

Article number
802
Product family
Diamond cutting
What should I check before ordering?

Send the article number, quantity and your machine model or serial number where applicable. Our team will check compatibility, pack contents and availability before you order.

Ask M&H Sales →
Use & care

Check the current technical and safety data sheets for preparation, mixing, PPE and storage. Check colour on a test panel before use.

Documents & product advice

Selection and use

Preparation and application
For clean, fully cured existing coatings. Activate and shake as directed on the can; test spray at approximately 250 mm. The technical sheet specifies 2–3 coats, 40–50 µm dry film and 5 minutes between coats.
Pot life and drying
Pot life 5–6 hours after activation. At 20 °C: dust dry 10–15 minutes, touch dry 4 hours, polish after 8–9 hours and fully cured after 24 hours. Conditions can change drying time.
Application conditions
The technical sheet specifies application from 10 °C with relative humidity up to 80%. Clear the valve after use as instructed on the product.
More product details
Handling
Read the current safety data sheet, use suitable protective equipment and provide appropriate ventilation. Mixing, curing and preparation must match the actual product and application conditions.

Technical documents

Technical data sheet (PDF)

Manufacturer documents are supplied in their original language. Use the current safety sheet and product label alongside the technical instructions.

M&H GROUP / 802

Specify your request.

Send the article number, quantity and your machine model or serial number where applicable. Our team will check compatibility, pack contents and availability before you order.

Get advice from M&H Sales →
Selected article802 / 2K Diamond Cut Clearcoat

Your selected article is included in the request. No payment or order is placed here.