Skip to main content

845

Diamond Clearcoat Package 3L incl mixing cups

Clearcoat, hardener and thinner, 1 L each, with mixing cups and sticks. Follow the product technical data sheet for mixing and application.

M&H Group / Thailand & APAC

Wheel Restore

Speak with M&H Sales

Send Sales a message →

Kevin Duffy

English-speaking sales

+66 88 984 8897

K. Kananek Khumto

Thai-speaking sales

+66 85 636 2519

Wheel colours & coatings

Product details.

Article number
845
Product family
Wheel colours & coatings
What should I check before ordering?

Share your colour or finish requirements, application method and quantity. M&H will confirm the paint system, pack contents, technical documents and any software licence in your quotation.

Ask M&H Sales →
Use & care

Check the current technical and safety data sheets for preparation, mixing, PPE and storage. Check colour on a test panel before use.

Documents & product advice

Selection and use

Pack and ratio
Gloss clearcoat, activator and thinner, 1 L each; 1:1:1 by volume. Intended for direct-to-metal diamond-cut work and compatible prepared basecoats.
Application and pot life
Two coats, 20–35 µm dry film; approximately 2 minutes flash-off between coats and 5 minutes before curing at 20 °C. Pot life approximately 7 hours at 20 °C.
Preparation
Keep surfaces dry and free of grease, silicone and other contamination. Recommended substrate temperature 15–25 °C; always test the required finish on a sample.
More product details
Curing
Technical-sheet examples: 15–20 minutes at 60 °C substrate temperature, or IR 10–15 minutes at approximately 200 mm with a 1 kW lamp. Cool to ambient temperature before use; follow the actual coating and lamp instructions.
Coverage and storage
Published theoretical coverage is approximately 12.5 m²/L at 25 µm with 100% transfer efficiency; real coverage is lower and application-dependent. Store in unopened original packaging as instructed; check the batch label.
Handling
Read the current safety data sheet, use suitable protective equipment and provide appropriate ventilation. Mixing, curing and preparation must match the actual product and application conditions.

Technical documents

Technical data sheet (PDF)

Manufacturer documents are supplied in their original language. Use the current safety sheet and product label alongside the technical instructions.

M&H GROUP / 845

Specify your request.

Share your colour or finish requirements, application method and quantity. M&H will confirm the paint system, pack contents, technical documents and any software licence in your quotation.

Get advice from M&H Sales →
Selected article845 / Diamond Clearcoat Package 3L incl mixing cups

Your selected article is included in the request. No payment or order is placed here.