
850
Diamond Cut Clearcoat Stormy Black Paint – 3 liter kit
Tinted clearcoat for a smoked-black effect on diamond-cut wheels. Kit contains clearcoat, activator and thinner, 1 L each.
M&H Group / Thailand & APAC
Wheel Restore
Speak with M&H Sales


Wheel colours & coatings
Product details.
- Article number
- 850
- Product family
- Wheel colours & coatings
What should I check before ordering?
Share your colour or finish requirements, application method and quantity. M&H will confirm the paint system, pack contents, technical documents and any software licence in your quotation.
Ask M&H Sales →Use & care
Check the current technical and safety data sheets for preparation, mixing, PPE and storage. Check colour on a test panel before use.
Documents & product advice
Selection and use
- Finish and ratio
- smoked black tinted clearcoat for diamond-cut wheels. Kit: 1 L colour, 1 L activator and 1 L thinner; mix 1:1:1 by volume. Check tint on a test piece; film build and technique affect appearance.
- Application
- Apply a light first coat followed by a full wet coat, to 20–30 µm dry film. Flash 2 minutes between coats and 5 minutes before curing.
- Pot life and aftercare
- Approximately 7–8 hours at 20 °C in the spray pot/PPS. Do not wash or chemically clean the finished wheel for 7 days after application, as specified in the technical sheet.
More product details
- Preparation
- Keep surfaces dry and free of grease, silicone and other contamination. Recommended substrate temperature 15–25 °C; always test the required finish on a sample.
- Curing
- Technical-sheet examples: 15–20 minutes at 60 °C substrate temperature, or IR 10–15 minutes at approximately 200 mm with a 1 kW lamp. Cool to ambient temperature before use; follow the actual coating and lamp instructions.
- Coverage and storage
- Published theoretical coverage is approximately 12.5 m²/L at 25 µm with 100% transfer efficiency; real coverage is lower and application-dependent. Store in unopened original packaging as instructed; check the batch label.
- Handling
- Read the current safety data sheet, use suitable protective equipment and provide appropriate ventilation. Mixing, curing and preparation must match the actual product and application conditions.
Technical documents
Technical data sheet (PDF)Manufacturer documents are supplied in their original language. Use the current safety sheet and product label alongside the technical instructions.
M&H GROUP / 850
Specify your request.
Share your colour or finish requirements, application method and quantity. M&H will confirm the paint system, pack contents, technical documents and any software licence in your quotation.
Get advice from M&H Sales →Your selected article is included in the request. No payment or order is placed here.



