Skip to main content

848

3-in-1 Wheel Paint / Black

3 L kit combining primer, base colour and clearcoat in a two-component wheel coating. Follow the current technical data sheet for preparation and mixing.

M&H Group / Thailand & APAC

Wheel Restore

Speak with M&H Sales

Send Sales a message →

Kevin Duffy

English-speaking sales

+66 88 984 8897

K. Kananek Khumto

Thai-speaking sales

+66 85 636 2519

Wheel colours & coatings

Product details.

Article number
848
Product family
Wheel colours & coatings
What should I check before ordering?

Share your colour or finish requirements, application method and quantity. M&H will confirm the paint system, pack contents, technical documents and any software licence in your quotation.

Ask M&H Sales →
Use & care

Check the current technical and safety data sheets for preparation, mixing, PPE and storage. Check colour on a test panel before use.

Documents & product advice

Selection and use

Kit and mixing ratio
3 L kit; colour : activator : thinner = 1:1:1 by volume. These ratios are shade-specific, not interchangeable across the 3-in-1 range.
Coating process
Combines primer, colour and clearcoat in one two-component wheel coating. The technical sheet describes bare metal or prepared coatings and coverage of P180 sanding marks; assess the actual substrate before use.
Application and pot life
Apply two coats to 20–30 µm dry film. Flash to matt between coats (typically 3 minutes), then 5 minutes before curing. The processing section gives approximately 7 hours pot life at 20 °C.
More product details
Preparation
Keep surfaces dry and free of grease, silicone and other contamination. Recommended substrate temperature 15–25 °C; always test the required finish on a sample.
Curing
Technical-sheet examples: 15–20 minutes at 60 °C substrate temperature, or IR 10–15 minutes at approximately 200 mm with a 1 kW lamp. Cool to ambient temperature before use; follow the actual coating and lamp instructions.
Coverage and storage
Published theoretical coverage is approximately 12.5 m²/L at 25 µm with 100% transfer efficiency; real coverage is lower and application-dependent. Store in unopened original packaging as instructed; check the batch label.
Handling
Read the current safety data sheet, use suitable protective equipment and provide appropriate ventilation. Mixing, curing and preparation must match the actual product and application conditions.

Technical documents

Technical data sheet (PDF)

Manufacturer documents are supplied in their original language. Use the current safety sheet and product label alongside the technical instructions.

M&H GROUP / 848

Specify your request.

Share your colour or finish requirements, application method and quantity. M&H will confirm the paint system, pack contents, technical documents and any software licence in your quotation.

Get advice from M&H Sales →
Selected article848 / 3-in-1 Wheel Paint / Black

Your selected article is included in the request. No payment or order is placed here.