Skip to main content
EN/TH
Drester by HedsonDrester cleaning equipmentDrester Classic 3600 Automatic Solvent Gun Cleaner
All Drester cleaning systems
Drester Classic 3600 Automatic Solvent Gun Cleaner

Drester product overview

What this product does and where it fits in the workshop.

Compare the product role, workshop use case, technical snapshot, and next-step guidance before requesting a quote.

What it does

Compare Drester Classic 3600 for automatic spray-gun cleaning with circulating thinner and a manual clean-thinner rinse, built-in extraction, air-channel protection, utility requirements, two-gun option, accessories, and conventional-paint workflow fit.

  • Automatically washes with circulating thinner and provides a separate manual rinse with clean thinner.
  • Air is blown through the spray gun's air channels during the wash cycle to keep them clear of solvent and debris.
  • The air-powered machine includes built-in extraction, an air-pressure regulator, and a water trap.
  • A two-gun model and several workflow options can be reviewed for the intended daily volume.
  • Extraction capacity depends on duct length, so the 5 m and 15 m official values should be checked against the room layout.
Best for

Common workshop applications and customer outcomes.

  • Conventional-paint spray-gun cleaning
  • Automatic circulating-thinner washing
  • Manual clean-thinner rinsing
  • Single- or two-gun paint-room workflow
  • Drester Dynamic Triple integration review
Technical snapshot

Key specification points that make the product easier to compare.

Paint systemConventional paints
Cleaning processAutomatic circulating-thinner wash with manual clean-thinner rinse
Power sourceAir powered
Gun capacityStandard configuration with two-gun model available
supplier page

Open the supplier product page when you need the manufacturer reference behind this recommendation.

Open official page

Drester conventional-paint gun cleaning

Match the Classic 3600 wash, rinse, and extraction option to daily gun volume.

Classic 3600 automatically cleans with circulating thinner and adds a manual clean-thinner rinse. The quote should confirm conventional-paint use, gun count, drum size, air, duct length, extraction, options, waste handling, and operator routine.

3600official article number
30 kgmachine weight
7-12 barair supply

What to confirm before selecting Classic 3600

  • Conventional paint brand, thinner process, spray-gun types, daily volume, and single- or two-gun requirement
  • 990 x 700 mm machine size, drum size, operator access, floor position, and maintenance clearance
  • 7-12 bar air, 250 l/min consumption, extraction duct length, and expected 140 or 180 m3/h extraction option
  • Options, cleaning media, waste containers, local solvent and fire requirements, maintenance ownership, and training

Drester Classic 3600 Automatic Solvent Gun Cleaner

How Classic 3600 handles the cleaning cycle

The automatic wash and manual clean rinse should be placed inside a defined solvent, extraction, and waste-control routine.

01

Confirm the paint process

Identify conventional paint and thinner, gun types, daily cleaning cycles, and required gun capacity.

02

Plan the installation

Confirm floor space, drum size, 7-12 bar air, duct length, extraction, and service access.

03

Wash and rinse

Use circulating thinner for automatic cleaning, protect the gun air channels, then complete the manual clean-thinner rinse.

04

Control solvent and waste

Assign drum changes, waste handling, nozzle and pump care, extraction checks, and operator training.

Drester Classic 3600 Automatic Solvent Gun Cleaner

Who should review Classic 3600 first

Classic 3600 fits conventional-paint departments that want a straightforward automatic wash with a controlled manual rinse.

Independent bodyshops

Add automatic conventional-paint gun cleaning without moving directly to a larger Ace system.

Dealer paint departments

Standardize circulating-thinner washing, clean rinsing, extraction, and daily care.

Existing Drester users

Review options, two-gun capacity, or Dynamic Triple compatibility for the wider solvent option.

APAC distributors

Confirm solvent process, utilities, extraction, local compliance, options, training, and service.

Drester Classic 3600 Automatic Solvent Gun Cleaner

Choose Classic 3600 for conventional-paint automatic washing with manual clean rinse.

Choose when
The paint room uses conventional paints and needs a practical automatic circulating-thinner wash with clean rinse.
Compare with
Compact Classic systems for lower demand, Ace for newer modular mixed-paint options, or Dynamic Triple for closed solvent recycling.
Check first
Paint chemistry, gun count, capacity, air, duct length, extraction, drum size, options, waste, local rules, and training.

Drester

Continue the Drester solvent-cleaning option

Drester Ace Spray-Gun CleanerSolvent- and water-based spraygun cleaning with ergonomic, efficient, quick, and safe operation for busy paint departments.Drester Ace Double AA waterbased Drester gunwasher designed for safe cleaning, autowash support, and a cleaner spray process in professional bodyshops.Drester Ace Double SA solvent-based Drester gunwasher built for quick and safe cleaning of paint equipment in busy daily production.Drester Ace Double CA combined Drester gunwasher for workshops that need to clean both solvent-based and water-based paint material in one system.

Classic 3600 buyer questions

Confirm the official cleaning process, utilities, extraction, and options.

Classic 3600 has a specific conventional-paint role and a verified article number; options must remain separate from the main machine number.

Question 1

What is the article number for Drester Classic 3600?

Hedson's official technical specification lists Part.no. 3600 for the main Drester Cleaning 3600 unit.

Question 2

How does Classic 3600 clean spray guns?

It automatically cleans with circulating thinner and provides a manual rinse with clean thinner. Air is blown through the gun's air channels during washing.

Question 3

What extraction does Classic 3600 require?

Hedson lists 180 m3/h with a 5 m extraction duct and 140 m3/h with a 15 m duct, plus 7-12 bar air and 250 l/min air consumption.

Question 4

Which option numbers are listed?

The official page lists 8910, 8501, 8920, 9290, 10970, and 12129 for options. These are not the main machine article number.

Technical data

Key points for comparing this product.

Use these rows as a technical comparison starting point. Final model, options, utilities, consumables, training, and installation details should be confirmed before preparing a quote.

Available technical rows
Supplier article no. - Blue
3600
Supplier article no. - Stainless steel
3600-INOX
Paint system
Conventional paints
Cleaning process
Automatic circulating-thinner wash with manual clean-thinner rinse
Power source
Air powered
Gun capacity
Standard configuration with two-gun model available
Machine weight
30 kg / 67 lb
Dimensions
990 mm high x 700 mm wide
Air supply
7-12 bar / 110-180 psi
Air consumption
250 l/min / 9 cfm
Extraction at 5 m duct
180 m3/h / 106 cfm
Extraction at 15 m duct
140 m3/h / 82 cfm
Liquid volume
Depends on drum size
Shipping
One unit on 600 x 800 mm half pallet, 35 kg
Options
8910 3-minute kit, 8501 adapter, 8920 hose extension, 9290 two-gun cradle, 10970 wash brush, 12129 3 m PPS extension pipe
Confirm before quote
Confirm conventional-paint process, gun count, drum size, air, extraction duct, floor space, options, waste option, training, and service
Process option
Automatic circulating-thinner wash followed by a manual clean-thinner rinse for conventional paints.
Unit format
Air-powered Classic 3600, official article 3600, with a two-gun model available.
Paint system fit
Designed for conventional-paint spray-gun cleaning, not waterborne-only or mixed-paint cleaning.
Capacity role
30 kg machine using 250 l/min air; extraction is 180 m3/h at 5 m duct or 140 m3/h at 15 m duct.
Workspace / utilities
Confirm 990 x 700 mm size, 7-12 bar air, drum size, duct option, extraction, solvent handling, waste, options, and service access.
Consumables option
Plan cleaning media, filters, waste handling, and operator maintenance discipline as part of the equipment decision.
Product role
Automatic circulating-thinner wash with manual clean rinse
Common applications
Conventional-paint spray-gun cleaning, Automatic circulating-thinner washing, Manual clean-thinner rinsing

Application images

See application images before contacting M&H Group.

Use these images to compare product use, workflow fit, and what to confirm with M&H Group before a quote.

Open full application gallery

Product videos

Watch the related video before the product conversation.

Use these videos to see the workflow, source information, and confirmation points before requesting a quote.

Gallery

Product imagery and workflow views for comparison.

Product images and workflow views for comparing fit, setup, and workshop use.

Brochure / manual

Open the official supplier page for the matching product family.

Open official page
Need help choosing

If you need setup guidance, comparison help, or a quote tailored to a specific workshop, contact M&H Group.

Discuss this product

Related Drester products

Continue browsing the Drester catalog.

DresterSpraygun cleaning
Ace Spray-Gun Cleaner

Ace Spray-Gun Cleaner

Solvent- and water-based spraygun cleaning with ergonomic, efficient, quick, and safe operation for busy paint departments.

View product detailsRequest quote
DresterWaterbased gunwasher
Ace Double A

Ace Double A

Article no. DG2A

A waterbased Drester gunwasher designed for safe cleaning, autowash support, and a cleaner spray process in professional bodyshops.

View product detailsRequest quote
DresterSolvent gunwasher
Ace Double S

Ace Double S

Article no. DG2S

A solvent-based Drester gunwasher built for quick and safe cleaning of paint equipment in busy daily production.

View product detailsRequest quote
DresterCombined gunwasher
Ace Double C

Ace Double C

Article no. DG2C

A combined Drester gunwasher for workshops that need to clean both solvent-based and water-based paint material in one system.

View product detailsRequest quote

Next action

Choose the next step for your equipment enquiry.

Buyers can open the product page, compare options, build a quote shortlist, or ask M&H Group to validate the workshop fit from one place.

01 Build quote shortlist

Add the products under review with workshop details so M&H can reply with a practical quote.

Open quote list 02 Compare products

Compare workflow roles, specifications, and details that affect product fit.

Open compare 03 Use Product Selector

Answer workshop questions and see the strongest equipment options to review first.

Use tool 04 Ask M&H Group

Ask the team to confirm model, layout, training, consumables, support, and purchase sequence.

Contact team

Next step

Upgrade the workshop conversation from equipment purchase to measurable production capability.

Discuss this product
QuoteCall