Skip to main content
EN/TH
Inframatic Semi-Automatic Infrared Lamps

Workshop role

Start with the product role, then choose the right specification.

Match the Spanesi product to real workshop work, installation planning, training, and the information needed before a quote.

Product role

Inframatic Semi-Automatic Infrared Lamps sits inside the Infrared and UV-A curing option and should be reviewed against installation space, real repair work, operator training, and support needs.

  • Supports overhead infrared curing workflow.
  • Rail-mounted panels can be positioned by length and width in prep areas or spray booths.
  • Each lamp can be adjusted by height and angle for surface radiation control.
  • Optional UV-A panel information from Spanesi product information.
  • Official page references high-efficiency resistors and reduced spray-booth cycle time.
  • Needs paint system, bay height, rail, and power review.
  • Inframatic review should confirm rail height, rail length/width movement, UV-A panel need, pyrometer use, booth/prep location, and power supply.
  • Official Spanesi material states an 8-program electronic control information and 150% efficiency / 35% energy savings information.

Where it fits

  • Spot drying
  • Prep and refinish support
  • Rail or trolley curing
  • Cycle-time control
Inframatic Semi-Automatic Infrared Lamps application view
Inframatic Semi-Automatic Infrared Lamps

Selection option

Review the product as part of the Spanesi workshop workflow.

Start from the work to improve, then check specifications, space, official media, and the quote information M&H Group needs.

01

Define the job to improve

Start with the repair task, available space, production target, and workflow problem.

02

Confirm the product role

Check where this product fits in the Spanesi bodyshop system and what it may need to work with.

03

Review specs and official media

Use the product data, images, videos, accessories, and documentation points before a quote.

04

Prepare the quote information

Share workshop details, vehicle mix, installation space, training needs, and support expectations with M&H Group.

Browse product data

Product information organized for easier comparison.

Open the details you need before discussing installation, training, parts, consumables, support, and quotation with M&H Group.

Overview

This overview gives the buyer a practical starting point before checking specifications, media, related equipment, and quote requirements for Inframatic Semi-Automatic Infrared Lamps.

  • Supports overhead infrared curing workflow.
  • Rail-mounted panels can be positioned by length and width in prep areas or spray booths.
  • Each lamp can be adjusted by height and angle for surface radiation control.
  • Optional UV-A panel information from Spanesi product information.
  • Official page references high-efficiency resistors and reduced spray-booth cycle time.
  • Needs paint system, bay height, rail, and power review.
  • Inframatic review should confirm rail height, rail length/width movement, UV-A panel need, pyrometer use, booth/prep location, and power supply.
  • Official Spanesi material states an 8-program electronic control information and 150% efficiency / 35% energy savings information.
Technical data
Category
Infrared lamps
Workflow
Dry / cure / control paint timing
Product role
Aerial infrared curing system with optional UV-A panel information
Result
Faster paint-process support when matched to repair size
Use case
Paint departments that need drying and curing support
IR electrical power
16.5 kW listed by Spanesi
Supply voltage
400V 3F + PE 50/60 Hz listed by Spanesi
Sliding rail height
2500 - 4000 mm listed by Spanesi
Radiation
Short wave infrared
Control
Temperature control with pyrometer information
Models
EVO 2, EVO 2 + 2 UV-A, and EVO 2 + 3 UV-A listed by Spanesi
Supply voltage
400V 3F+PE 50/60Hz listed by Spanesi
Sliding rail height
2500 mm to 4000 mm listed by Spanesi
Radiation
Short wave infrared listed by Spanesi
Model range
EVO 2, EVO 2 + 2 UV-A, and EVO 2 + 3 UV-A listed by Spanesi
Workshop use
Infrared/UV-A curing, drying, and paint-process support decision
Choose the correct configuration
Confirm repair size, paint material, rail or trolley format, power, distance, and process timing
Training plan
Plan curing settings, safe distance, material limits, and daily operator routine
Ongoing support
Confirm lamps/panels, service parts, inspection intervals, and support
Common applications
Spot drying, Prep and refinish support, Rail or trolley curing
Accessory article no. - Portable UV-A Lamp
10002192
Open official page
Applications
  • Spot drying
  • Prep and refinish support
  • Rail or trolley curing
  • Cycle-time control
Videos

No product-specific video is currently listed in the M&H Group video library.

Related Spanesi equipment
Marea Aerial Infrared LampsMarea Aerial Series is Spanesi's overhead infrared lamp option for bodyshop space optimization, using aluminum rails and short-wave infrared information.Marea Manual Infrared Lamps and TrolleysMarea Manual Series is Spanesi's range of infrared lamps and trolleys designed to move through the bodyshop, with optional portable UV-A lamp information.Spanesi Touch Portable Measuring SystemSpanesi Touch Portable is the compact, transportable measuring system for Thailand and APAC collision repair teams reviewing damage diagnostics, structural measurement, suspension checks, comparative measurements, repair documentation, and quote planning with M&H Group.100 Series Frame MachinesThese are Spanesi structural repair workstations for a wide range of damage, with 10-ton pulling force and Universal Jig compatibility shown on the supplier page.
Quote requirements
  • Country, workshop type, and main repair work
  • Selected Spanesi model or product family
  • Installation space, training, documentation, spare parts, and aftersales expectations
Request Spanesi quote review

Product media

Review images and videos before the equipment discussion.

Use the visual material to understand the product, workshop fit, and points to confirm before requesting a quote.

Application images

See application images before contacting M&H Group.

Use these images to compare product use, workflow fit, and what to confirm with M&H Group before a quote.

Open full application gallery

Spanesi project paths

Continue from Inframatic Semi-Automatic Infrared Lamps into related Spanesi pages.

Use this related equipment and supporting information to compare the product family, OEM information, APAC support, and regional project paths before requesting advice.

Related page

Infrared curing systems

Review infrared curing systems for paint drying control and cycle time planning.

Open detailsRelated page

Marea

Review Marea for curing workflow and paint department planning.

Open detailsRelated page

Paint booths

Connect curing choices with paint booth and prep workflow decisions.

Open detailsRelated page

Spanesi hub

View Spanesi as a complete bodyshop system before choosing individual models.

Open details

Next step

Send the details M&H Group needs for a Spanesi quote review.

Start with the product, workshop type, country, installation space, training needs, documentation needs, spare parts, and aftersales expectations.

Request Spanesi quote review

Spanesi

Related Spanesi equipment

Marea Aerial Infrared LampsMarea Aerial Series is Spanesi's overhead infrared lamp option for bodyshop space optimization, using aluminum rails and short-wave infrared information.Marea Manual Infrared Lamps and TrolleysMarea Manual Series is Spanesi's range of infrared lamps and trolleys designed to move through the bodyshop, with optional portable UV-A lamp information.Spanesi Touch Portable Measuring SystemSpanesi Touch Portable is the compact, transportable measuring system for Thailand and APAC collision repair teams reviewing damage diagnostics, structural measurement, suspension checks, comparative measurements, repair documentation, and quote planning with M&H Group.100 Series Frame MachinesThese are Spanesi structural repair workstations for a wide range of damage, with 10-ton pulling force and Universal Jig compatibility shown on the supplier page.

Next action

Choose the next step for your equipment enquiry.

Buyers can open the product page, compare options, build a quote shortlist, or ask M&H Group to validate the workshop fit from one place.

01 Build quote shortlist

Add the products under review with workshop details so M&H can reply with a practical quote.

Open quote list 02 Compare products

Compare workflow roles, specifications, and details that affect product fit.

Open compare 03 Use Product Selector

Answer workshop questions and see the strongest equipment options to review first.

Use tool 04 Ask M&H Group

Ask the team to confirm model, layout, training, consumables, support, and purchase sequence.

Contact team
QuoteCall