Skip to main content
EN/TH
Daytona Truck

Workshop role

Start with the product role, then choose the right specification.

Match the Spanesi product to real workshop work, installation planning, training, and the information needed before a quote.

Product role

Daytona Truck sits inside the Frame machine and structural repair option and should be reviewed against installation space, real repair work, operator training, and support needs.

  • Designed for truck cab and chassis repair.
  • Supports simultaneous holds and multiple pulls for complex repairs.
  • Configurable workstation with multiple pulling-column paths.
  • Official page references pull bars with two cylinders and 20 tons per bar.
  • Compatible with the Spanesi Universal Jig repair platform.
  • Requires careful layout and installation review.

Where it fits

  • Structural repair
  • Frame correction
  • Pulling and anchoring
  • Bodyshop repair planning
Daytona Truck application view
Daytona Truck

Selection option

Review the product as part of the Spanesi workshop workflow.

Start from the work to improve, then check specifications, space, official media, and the quote information M&H Group needs.

01

Define the job to improve

Start with the repair task, available space, production target, and workflow problem.

02

Confirm the product role

Check where this product fits in the Spanesi bodyshop system and what it may need to work with.

03

Review specs and official media

Use the product data, images, videos, accessories, and documentation points before a quote.

04

Prepare the quote information

Share workshop details, vehicle mix, installation space, training needs, and support expectations with M&H Group.

Browse product data

Product information organized for easier comparison.

Open the details you need before discussing installation, training, parts, consumables, support, and quotation with M&H Group.

Overview

This overview gives the buyer a practical starting point before checking specifications, media, related equipment, and quote requirements for Daytona Truck.

  • Designed for truck cab and chassis repair.
  • Supports simultaneous holds and multiple pulls for complex repairs.
  • Configurable workstation with multiple pulling-column paths.
  • Official page references pull bars with two cylinders and 20 tons per bar.
  • Compatible with the Spanesi Universal Jig repair platform.
  • Requires careful layout and installation review.
Technical data
Category
Frame machine
Workflow
Hold / pull / measure / correct
Product role
Heavy-duty truck repair bench for cab and chassis repair
Result
Controlled structural repair process
Use case
Bodyshops handling structural collision repair
Standard length
26 ft 2 in listed by Spanesi
Standard width
19 ft 8 in listed by Spanesi
Height
10 ft 5 in listed by Spanesi
Pulling force
20 ton listed by Spanesi
Repair scope
Truck cab and chassis repair
Universal Jig
Official page connects Daytona Truck with Spanesi Universal Jig System
Standard size
26 ft 2 in long, 19 ft 8 in wide, 10 ft 5 in high listed by Spanesi
Pulling force
20 ton pulling force listed by Spanesi
Vehicle information
Commercial vehicles, buses, coaches, tractors, semi-trailers, caravans, and tankers are listed by Spanesi
System information
Universal Jig System connection and heavy-duty holding information listed by Spanesi
Workshop use
Structural repair bench, pulling, holding, anchoring, and frame-correction workflow
Choose the correct configuration
Confirm vehicle size, damage severity, bay footprint, anchoring method, pulling force, and measuring integration
Training plan
Plan structural repair, safe holding, pull sequencing, and measurement confirmation training
Ongoing support
Confirm accessories, clamps, jigs, software, service parts, and support cadence
Common applications
Structural repair, Frame correction, Pulling and anchoring
Open official page
Applications
  • Structural repair
  • Frame correction
  • Pulling and anchoring
  • Bodyshop repair planning
Videos
CAB-FIX | Every cabin. One system.CAB-FIX introduces Spanesi's truck cabin repair option for heavy-duty bodyshops comparing cabin alignment, holding, and structural repair capability.
Related Spanesi equipment
100 Series Frame MachinesThese are Spanesi structural repair workstations for a wide range of damage, with 10-ton pulling force and Universal Jig compatibility shown on the supplier page.Daytona Frame Straightening WorkstationDaytona is a frame straightening workstation built around concentric tracks so pulling columns can move independently around the vehicle for complex repair setups.KiTO Holding SystemKiTO is Spanesi's holding system for faster anchoring and holding power, positioned for more vehicles without vehicle-specific add-ons in the official Spanesi material.Multibench EXTThis is a repair platform for medium to large vehicles, with Spanesi listing 12,000 lbs load capacity, 10-ton pulling force, and electro-hydraulic lift information.
Quote requirements
  • Country, workshop type, and main repair work
  • Selected Spanesi model or product family
  • Installation space, training, documentation, spare parts, and aftersales expectations
Request Spanesi quote review

Product media

Review images and videos before the equipment discussion.

Use the visual material to understand the product, workshop fit, and points to confirm before requesting a quote.

Application images

See application images before contacting M&H Group.

Use these images to compare product use, workflow fit, and what to confirm with M&H Group before a quote.

Open full application gallery

Product videos

Watch the related video before the product conversation.

Use these videos to see the workflow, source information, and confirmation points before requesting a quote.

Spanesi project paths

Continue from Daytona Truck into related Spanesi pages.

Use this related equipment and supporting information to compare the product family, OEM information, APAC support, and regional project paths before requesting advice.

Related page

100 Series frame machines

For structural holding, pulling, repair bay planning, and bodyshop frame-machine decisions.

Open detailsRelated page

Daytona frame straightening

For structural repair projects that need a clear workstation and equipment path.

Open detailsRelated page

Universal Jig

Review jig and anchoring workflow for structural repair projects.

Open detailsRelated page

Touch measuring

Use Touch to measure, diagnose, and document the repair before choosing the structural path.

Open details

Next step

Send the details M&H Group needs for a Spanesi quote review.

Start with the product, workshop type, country, installation space, training needs, documentation needs, spare parts, and aftersales expectations.

Request Spanesi quote review

Spanesi

Related Spanesi equipment

100 Series Frame MachinesThese are Spanesi structural repair workstations for a wide range of damage, with 10-ton pulling force and Universal Jig compatibility shown on the supplier page.Daytona Frame Straightening WorkstationDaytona is a frame straightening workstation built around concentric tracks so pulling columns can move independently around the vehicle for complex repair setups.KiTO Holding SystemKiTO is Spanesi's holding system for faster anchoring and holding power, positioned for more vehicles without vehicle-specific add-ons in the official Spanesi material.Multibench EXTThis is a repair platform for medium to large vehicles, with Spanesi listing 12,000 lbs load capacity, 10-ton pulling force, and electro-hydraulic lift information.

Next action

Choose the next step for your equipment enquiry.

Buyers can open the product page, compare options, build a quote shortlist, or ask M&H Group to validate the workshop fit from one place.

01 Build quote shortlist

Add the products under review with workshop details so M&H can reply with a practical quote.

Open quote list 02 Compare products

Compare workflow roles, specifications, and details that affect product fit.

Open compare 03 Use Product Selector

Answer workshop questions and see the strongest equipment options to review first.

Use tool 04 Ask M&H Group

Ask the team to confirm model, layout, training, consumables, support, and purchase sequence.

Contact team
QuoteCall